Stargazer 12”: Buy It Bare, Season It in Tallow

An editorial, stated plainly at the top: I don't own this pan. It's my pick from the modern smooth-iron field — it was one of the three picks in the Cast Iron Collection post, and its row in the Pan Series finale chart landing Fri Nov 27, 2026 — judged here on process, specifications, and the maker's record, not on time at my stove. Construction scores, labeled as such.

Most cast iron buying advice is about size. This one is about a checkbox: seasoned or bare. Stargazer sells its 12-inch skillet both ways at the same price — $175 — and that one decision is the whole teardown, because the two pans leave Pennsylvania as materially different products.

The process is the argument

Start where Benton's Rule starts: materials and construction. The Stargazer is traditional gray iron, US-sourced and primarily recycled, green-sand cast in one piece — iron melted at 2,800°F, poured, cooled. That is the oldest way to make a skillet and still the right one; there's no coating, no cladding, nothing to delaminate.

What separates it from a commodity skillet happens after the pour. The entire interior is CNC-machined — not ground in a band, not left pebbled as-cast, but machined across the whole surface. That's where the smooth cooking surface comes from, and it's also where the weight control comes from: 6.5 lb at a 12.0″ rim with a 9.4″ cooking surface, 2.3″ deep, 3.4 qt capacity, 21.5″ total length. Those are vintage #10-class dimensions at a weight one hand can actually work with. The pan is hand-finished in the Lehigh Valley (Allentown, Pennsylvania), made entirely in the USA, and the date it was cast is stamped on the helper handle. A maker that stamps the cast date on the pan is a maker keeping books.

The warranty matches the construction: lifetime, covering defects and failure in proper use, with 45-day full-refund returns. Seasoning loss and rust are explicitly home-fixable, not claimable — which is honest, because on bare iron they are maintenance, not defects.

The finish problem — and the bare fix

Here is the Craft-specific problem with the seasoned version. Its factory finish is two coats of a canola, grapeseed, and sunflower oil blend. That is a seed-oil seasoning, and it runs directly against how this kitchen works: whole, minimally processed ingredients, animal fats over seed oils and additives. The blend is not a quality failure — it polymerizes fine and the pan cooks — but it's a finish I'd strip and rebuild on any pan that came through my door, which makes paying for it pointless.

The bare version removes the problem at zero cost. Bare is the same $175 — Stargazer does not discount it and does not surcharge it. It ships unseasoned in a mineral-oil transit coat that wipes off, and then the seasoning is yours to build. In my kitchen that means tallow — the fat iron was seasoned with for a century before blended vegetable oils got cheap. A machined-smooth surface takes seasoning differently than a pebbled one — thinner coats, wiped almost dry, built up in rounds — and the payoff for doing it yourself is a finish whose entire history you know, made of one ingredient you chose.

That is the buy: same pan, same price, your seasoning instead of their blend.

The drawbacks, in the open

  • Price against the field. Machined modern iron runs 3–5× a rough commodity skillet. The iron itself is not exotic — it's gray iron — so the $175 is buying machining time, hand-finishing, and a US foundry's labor. Decide with that in front of you: you are paying for finish and process, not for a wonder material.

  • Thermal mass is the trade. At 6.5 lb the Stargazer gives up some of the heat reservoir a heavier vintage-style pan carries. That's the deliberate exchange for handling — a pan you can move, tilt, and work one-handed — but a cook who wants maximum thermal mass above all else should hear that this pan chose the other side of the trade.

  • Bare means work. The recommendation above is labor: wipe off the transit coat, then build seasoning in rounds before the pan cooks at its best. The seasoned version exists for people who don't want that job — they just start on a seed-oil blend instead. There is no free version of this choice.

  • Editorial limits. I have not cooked on this pan. Everything above is process, specification, and record — the same basis the Nov 27 finale chart scores it on, marked as a construction score there too.

The verdict

Against Benton's Rule: the metallurgy is plain and correct (gray iron, one-piece cast), the construction process is the differentiator (full-surface CNC machining, hand-finishing, a stamped cast date), and the longevity case is written down (lifetime warranty, a pan with nothing on it that can wear out except seasoning you can rebuild). The value clause is the honest fight — 3–5× commodity money — and the machining is what the premium buys, stated plainly enough for a reader to refuse it.

If you buy one: buy it bare, season it in tallow, and the seed-oil question never reaches your stove.

The full Pan Series comparison chart lands Fri Nov 27, 2026, and this pan's pick is one of its rows. The Teardown, Weekly — Craft Over Location's Sunday newsletter — carries the chart and the rest of the series when it publishes; subscribe on the site to get it in your inbox.

Get The Teardown, Weekly — one email a week with the newest teardown and one older piece worth a second look. No spam, unsubscribe anytime.

Next
Next

All-Clad D5 Stainless 12” Fry Pan — Pan Series #9 (Editorial)